It can be produced till maximum 500 mm width and 0.1 mm sensibility.
All desired roughening operations till 200 mm width can be applied.
At all desired sizes taper boring operation can be applied.
It can be produced at wide range of thicknesses and properties as endless or finite.
Please click for frequently asked questions about Coats…
It can be produced on request in desired all kinds of sizes and types. For our available profile types, please visit our databank. For a profile type which is unavailable in our databank, please contact us…
Guide operations are used for different type of guides except self guided belts.
It can be applied to thermoplastic belts which are minimum 400 mm in length.
T5 T10 T20 AT10 AT20 AT5 H L XH
It can be applied to all belts from thermoplastic material till maximum 700 mm in width.
It can be applied to all types of tooth which are bigger than T5 and H type of tooth and are used as alternative to thermal bonding methods.
Tooth decrement operations which are used for mechanical profile applications can be applied to all belts.
It can be applied to all belts.
It can be produced all belts and bands in all desired hole scheme and form.
Storage Ambiant Conditions
Technical Support Form
Görükle Sanayi Bölgesi Dumlupınar Mh. Gümüş Cd. No: 5 Nilüfer -
Phone : +90 224 443 55 55
Fax : +90 224 441 07 01
All rights reserved. Orhan Ticaret © 2012